With this thermal copier you can efficently and reliably create copies of your tattoo designs.
You can control how fast the paper goes through the printer. Lowering the speed will make the copy darker and adding speed makes the copy lighter.
Usually a speed setting between 6.5 and 8 will give the best result but some adjusting might be needed for different types of papers and designs.
The copier is nearly free of maintenance but spare parts are available in our shop and easy to change if needed.
A carrier sheet is recommended when using the copier to prevent any mess and paper jams.
Features:
- Easy to use & clean
- Dual fan system and temparature sensors ensure the heating and cooling of the copier goes smoothly
- Automatic overheating protection
- Adjustable speed
- Manual and directions on how to make a stencil included (DE/EN)
- Comes with one carrier sheet
Technical details:
- Design: Metal case, microprocessor control, dual fans, automatic overheat protrection, CE
- Dimensions (WxDxH): 45cm x 20cm x 11,5cm
- Weight: 6 kg
- 2 LED lights for indicating the device status
- Nominal voltage: 230 V ~ /50 Hz
- Nominal current: 6 A
- Internal fuse (for lamp): 10 At - 6.3*32 mm
- Output: 1350 Watts
- Fuse for electrical outlet 16 A
- Max size of copied original: 21cm x 30cm
- Recommended carrier size: 230cm x 350cm
- Model number: 953H1a
- Warranty: 12 months
- CE certified
Made in Germany.
PLEASE NOTE! You need to use laser printed prints in order to use this machine properly. Usually prints made with ink-jet printers will not work.
This is a 230V device only, not compatible with 110V power for countries such as the US etc..
Version history:
2.0
- 2 LEDs instead of one, green & red, indicating the status of the device
- 2 relays instead of 1, controlling each other
- an additional temp.-sensor regulates both lamp and cooling down process
Please make sure to see the maintenance checklist so you can ensure your copier keeps performing optimally for years to come!