Swashdrive Gen8 Rotary Brushless Adjustable

Currently unavailable

449.00
Delivery weight: 172 g
Available delivery methods: Pick up, Matkahuolto Near Parcel, Matkahuolto Express Parcel, Posti - Standard Parcel, Posti - Parcel Locker, Posti - Express, Posti - Express 9, Posti - Flex 21, Posti - Saturday Delivery Parcel, Posti - Postal Parcel Baltic, Local Post EMS, DHL Economy, DHL Economy, DHL Economy, DHL Economy, DHL Economy, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express Worldwide, DHL Express, DHL Express, DHL Express, Matkahuolto Kotijakelu, DHL Economy, FedEx Economy, FedEx Economy, FedEx Economy

New design adjustable Gen 8 Brushless, with the same adjustable or rigid swashplate.

- Hinged adjustable rear bearing track.
- 5 watt brushless motor custom built by Swashdrive using some Maxon parts. (Our custom motor can be rebuilt when the bearings wear out, just send it back to us for a low cost overhaul.)
- The new Gen8 is smaller, lighter and better balanced than our previous model.
- We have laser etched the polished stainless steel tube clamp.

We have made the brushless Gen 8 as small as possible.  It comes with a set of 2 anvil weights, a bottle of Oust oil, and allen keys to make any adjustments.

The brushless Gen8 has the same adjustable give clip as the previous model, which goes from rock hard to feather soft with an easy shift of the mechanism.

Our Gen8 series now come with the needle tensioner fitted to the frame.


Important Information on the Brushless Motor:

Brushless Motor Characteristics:
The brushless motor powering your new Brush is an entirely new technology in small DC powered motors.

A minimum start-up voltage of 9.0 volts is required to activate the electronic circuit board that controls the motor. This may seem high but that is the way it is designed and will not cause any damage. The current draw at 9.0 volts is only 0.1 amp (0.9 watt) and 20 volts will draw 0.5 amps and deliver a massive 10 watts of power.

Motor spool up may seem slow at first but this is part of its electronic programming to ensure a softer ramping up of motor acceleration up to the desired RPM. This is very different to a typical brushed motor which responds instantly when it is powered up.
The brushless motor also has an internal speed governing circuit which maintains very accurate speed settings as load varies during operation.

The result is super smooth running and zero motor surging.

Important to note - the power input is polarity sensitive + -  
The positive (Red) wire must be connected to centre of the RCA plug.
Wiring  the machine the other way will not destroy anything, it simple will not operate !

There is also an overload cut out to prevent motor destruction in the event of a lockup or overload situation. In this case the motor will trip out and reset after 3 seconds before restarting.


Operating Voltages:
9 volts at start-up will deliver 2000 rpm or 33 CPS
11 volts = 3000 rpm / 50 CPS
13 volts = 6000 rpm / 100 CPS
16 volts = 9000rpm / 150 CPS
Maximum RPM is 22 volts
Machine weight 81 grams (2.8 oz)


Warranty:
The Swashdrive Tattoo machines have a 6 month warranty from date of purchase. To which Swashdrive Developments will repair any manufacturing fault of the machine free of charge. However disassembly of electric motor from the main machine frame, or excess voltage from single knob power supplies wrecking electric motor will invalidate warranty. Proof of date of purchase must be provided for a warranty claim.

 

Customers who bought this product also bought

Delivery weight: 100 g
Delivery weight: 100 g
Delivery weight: 15 g
Delivery weight: 100 g
Delivery weight: 110 g
Delivery weight: 100 g