Dan Kubin - DMC - Ink Black

Dan Kubin - DMC - Ink Black

Ei saatavilla tällä hetkellä

Ilman alv:tä
Toimituksen paino: 230 g

The DMC is a punchy all purpose driver for both standard and cartridge needles.

Effortlessly line off the tip of the needle, and shade and pack with finesse and ease - No tuning. No lubrication.

Flipping polarity of the clipcord significantly changes the hit of the machine from sharp to slightly dull.  The sharper setting mainly for larger lines and precision shading, and the duller setting for fine line and lower volts operations.

There is an adjustment screw for disengaging a return spring for use with cartridges. Back it out all the way when using cartridges, and turn it in all the way when using standard needles. The adjustment is also shown in the video below for reference.

The thumbscrew on the DMC is ambidextrous.  This means it can be on either side of the frame to suit the artist's preferences.

The clipcord holes are tapered. One can insert their cord easier, and lock it in place.  This will ensure a very solid electrical connection, but please note that this is only if your clipcord prongs are of a standard size.

- Runs in the 4.5-6.5 volt range (This will increase over time as the motor breaks in.)
- Machine weight approx. 137 grams (4.8 oz)

The DMC is a continuation of the technology of the Swingliner, but with a more crispy hit.

For general care instructions for your machine please read the DMC Care Sheet.

PLEASE NOTE! All Dan Kubin machines can only be serviced by Dan Kubin, distributors are not allowed to perform any maintenance or replace machines and the manufacturer can give the best possible help. For maintenance, technical issue support and warranty issues please contact Dan Kubin directly.


Asiakkaat, jotka ostivat tämän tuotteen, ostivat myös

Toimituksen paino: 220 g
Toimituksen paino: 25 g
Toimituksen paino: 5 g
True Tattoo Armrest
Toimituksen paino: 3 500 g
Toimituksen paino: 150 g
Toimituksen paino: 4 000 g

Selaa tätä tuoteryhmää: Dan Kubin