TatuDerm Inkjet Stencil 120ml


TatuDerm Inkjet Stencil 120ml

Varastossa

159,00 / pullo(a)
Ilman alv:tä
Toimituksen paino: 180 g

pullo(a)

120ml bottle of patented methyl violet formula for printing InkJet Stencils - 120ml will print approximately 3000 stencils!
InkJet Stencil allows you to print high quality stencils with Epson EcoTank printers. Simply fill the printer's ink reservoirs in equal parts and set up your printer like you usually would and you can get to work! You can edit the images in your photo editor, adjust them as needed and then just print them.

Core benefits:
- InkJet Stencils are less than half the price per printed page compared to traditional carbon paper stencils!
- Two bottles are needed to fill all four tanks on a new EcoTank printer, but one 120ml is also enough to work with, just fill the tanks evenly
- High resolution, high detail stencils
- Vegan


PLEASE NOTE! Before use:
- You will need a brand new Eco tank type printer to use the InkJet Stencil, compatible printer models are listed below. The printer has to be 100% unused. There is a risk of severe health issues if the stencils are contaminated with printer ink and you will be putting your client in danger!
- After you use the InkJet Stencil on a printer it is pretty much impossible to get it cleaned so the printer can never be used for anything else
- If you are using only one 120ml bottle make sure you fill out all tanks evenly
- Ensure the printer is in an upright position before use to avoid any failures
- Because the InkJet Stencil system is carbon-less is is vital to use a prep spray for transferring the stencil from the tracing paper to the skin, The InkJet Stencil Prep is recommended
- Pacon Tracing paper for InkJet is recommended
- All questions about the use of this product should be directed directly to the manufacturer through their site at www.tatuderm.com or instagram @inkjetstencils
Unfotunately we cannot provide direct support for the use of this product, you will get the best advice by contacting the manufacturer directly.


Compatible Printers: EcoTank ET-2750, EcoTank ET-2700, EcoTank ET-2650, EcoTank ET-2600, EcoTank ET-2550, EcoTank ET-2500
PLEASE NOTE! All the se models can be used with the InkJet Stencil, however the manufacturer recommends the Epson EcoTank ET-2650 model as it allows for the easiest pouring  of the stencil fluid in the tank.


Made in USA.

 

Oheistuotteet

Tuote Huomaa Tila Hinta
Pacon Tracing Paper for InkJet 500pcs Pacon Tracing Paper for InkJet 500pcs
29,00 €
Toimituksen paino: 1 400 g
TatuDerm InkJet Stencil Prep 8oz TatuDerm InkJet Stencil Prep 8oz
9,90 € / pullo(a)
pullo(a)
Toimituksen paino: 265 g
Näytä oheistuotteiden tiedot

Asiakkaat, jotka ostivat tämän tuotteen, ostivat myös

EZ Revolution Round Shaders, 20pcs
Alkaen 14,90 / laatikkoa
Toimituksen paino: 130 g
EZ Revolution Round Liners, 20pcs
Alkaen 14,90 / laatikkoa
Toimituksen paino: 130 g
EZ Revolution Curved Magnums, 20pcs
Alkaen 14,90 / laatikkoa
Toimituksen paino: 130 g
Toimituksen paino: 865 g
EZ Revolution Magnums, 20pcs
Alkaen 14,90 / laatikkoa
Toimituksen paino: 130 g
Toimituksen paino: 1 400 g

Selaa myös nämä tuoteryhmät: Kynät/tussit, tabletti tarvikkeet, Kynät/tussit