Swashdrive The Brush III with Grip

Ei saatavilla tällä hetkellä

569,00
Ilman alv:tä
Toimituksen paino: 250 g
Käytettävissä olevat toimitustavat: Nouto, Matkahuolto Lähellä, Matkahuolto Jako, Posti - Postipaketti, Posti - Pakettiautomaatti, Posti - Express-paketti, Posti - Express aamuksi 09, Posti - Kotipaketti 21, Posti - Lauantaijakelu, Posti - Postal Parcel Baltic, Local Post EMS, DHL Economy, DHL Economy, DHL Economy, DHL Economy, DHL Economy, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, DHL Express, Matkahuolto Kotijakelu, DHL Economy, FedEx Economy, FedEx Economy, FedEx Economy

The latest innovation from Swashdrive, a sleek, lightweight, slim line cartridge tattoo machine that really does make it seem like you are tattooing with a Brush!

Every machine comes with two pushrods (1 solid/ 1 adjustable).

The new brushless motor powering our latest machine is a whole new technology in small DC powered motors. Startup voltage is 9.0 volts, this is the minimum voltage needed to power up the electronic circuit board that controls the motor.
 
The new style k-mount grip has a Zytel ( heavy duty polymer ) sleeve and a steel interior for superior cartrigde locking.

- Includes 2 different length pushrods
- Warranty: 12 months
- Machine weight (without grip): 110grams (~3.9oz)
- Grip weight: 37grams (1.3 oz)


Important Information on the Brushless Motor - Brushless Motor Characteristics:

The brushless motor powering your new Brush is an entirely new technology in small DC powered motors.

A minimum start-up voltage of 9.0 volts is required to activate the electronic circuit board that controls the motor. This may seem high but that's the way it's designed and will not cause any damage. The current draw at 9.0 volts is only 0.1 amp (0.9 watt) and 20 volts will draw 0.5 amps and deliver a massive 10 watts of power.

Motor spool up may seem slow at first but this is part of its electronic programming to ensure a softer ramping up of motor acceleration up to the desired RPM. This is very different to a typical brushed motor which responds instantly when it's powered up.
The brushless motor also has an internal speed governing circuit which maintains very accurate speed settings as load varies during operation.

The result is super smooth running and zero motor surging.

Important to note - the power input is polarity sensitive + -  
The positive (Red) wire must be connected to centre of the RCA plug.
Wiring the machine the other way will not destroy anything, it simple will not operate !

There is also an overload cut out to prevent motor destruction in the event of a lockup or overload situation. In this case the motor will trip out and reset after 3 seconds before restarting.

Operating Voltages:
9 volts at start-up will deliver 2000 rpm or 33 CPS
11 volts = 3000 rpm / 50 CPS
13 volts = 6000 rpm / 100 CPS
16 volts = 9000rpm / 150 CPS
Maximum RPM is 22 volts 

 


 

Asiakkaat, jotka ostivat tämän tuotteen, ostivat myös

Elite 3 Needle Cartridge 20pcs - Round Shaders
Alkaen 15,90 / laatikkoa
Toimituksen paino: 150 g
Toimituksen paino: 150 g
Toimituksen paino: 290 g
Inkjecta Nano Cam
Alkaen 22,10
Toimituksen paino: 8 g
Panthera Babool Soap 1000ml
13,50 / pullo(a)
Toimituksen paino: 1 250 g
Da Vinci V2 Cartridges 20pcs - Round Liners
Alkaen 23,90 / laatikkoa
Toimituksen paino: 200 g