Whether you're at the top of your career, or starting your PMU journey, the Xion Mini is the machine designed for everyone.

Microbeau's first, compact, pen-style, PMU machine, designed to give artists full control of their work with no compromises. With its 2.5mm stroke, the Xion Mini is versatile and ready to take on all kinds of skin types right out of the box.

Descendant to the Xion S, the Xion Mini is powered by our proprietary drive mechanism to provide consistent power with virtually no vibration. With a built-in 'click' grip adjustment system that allows you to fine-tune your needle length with accuracy each time, locking your setting into place.

Powered by RCA connectivity or pair it with our Airbolt wireless solutions (cord and Airbolt sold separately) for ultimate portability, eGive and Siri voice control. Or pair it with the Airbolt Mini for full control during sessions, and for a more hygienic tattooing session. Experience two times the miniature power.

The Xion Mini is a straightforward device that is suitable for all skill levels within your PMU Career. Designed to be maintenance free, allowing you to spend more time creating and less time maintaining your device. 

Features:
- Compact and ergonomic design
- The machine's center off mass provides optimal balance, thus reducing hand fatigue
- Built-in 'click' grip adjustment system for needle depth
- Darklab proprietary motor with virtually no vibration
- Compatible with most standard membrane cartridges
- eGive and Siri voice control capabilities through the Darklab app via wireless solution, the Airbolt Mini (sold separately)
- RCA connectivity (cord sold separately!)

Technical details:
- 2.5mm stroke
- Operating voltage: 5-10V, exceeding 10V is not recommended
- Lightweight at only 92 grams (3.1 ounces)
- Dimensions: 30 x 91,5mm
- Grip: tapered, from 30mm to 19mm

 For more information check the Xion Mini manual.

The machine motor has a 2 year warranty and other parts have a 1 year warranty. Please note that this updated warranty applies to machines purchased in 2023 and after only.

Please note! This machine is compatible with most membrane cartridges. Cartridges without membrane may cause ink leakage to the motor. Ink or other liquid inside the machine will void the warranty.

Whether you're at the top of your career, or starting your PMU journey, the Xion Mini is the machine designed for everyone.

Microbeau's first, compact, pen-style, PMU machine, designed to give artists full control of their work with no compromises. With its 2.5mm stroke, the Xion Mini is versatile and ready to take on all kinds of skin types right out of the box.

Descendant to the Xion S, the Xion Mini is powered by our proprietary drive mechanism to provide consistent power with virtually no vibration. With a built-in 'click' grip adjustment system that allows you to fine-tune your needle length with accuracy each time, locking your setting into place.

Powered by RCA connectivity or pair it with our Airbolt wireless solutions (cord and Airbolt sold separately) for ultimate portability, eGive and Siri voice control. Or pair it with the Airbolt Mini for full control during sessions, and for a more hygienic tattooing session. Experience two times the miniature power.

The Xion Mini is a straightforward device that is suitable for all skill levels within your PMU Career. Designed to be maintenance free, allowing you to spend more time creating and less time maintaining your device. 

Features:
- Compact and ergonomic design
- The machine's center off mass provides optimal balance, thus reducing hand fatigue
- Built-in 'click' grip adjustment system for needle depth
- Darklab proprietary motor with virtually no vibration
- Compatible with most standard membrane cartridges
- eGive and Siri voice control capabilities through the Darklab app via wireless solution, the Airbolt Mini (sold separately)
- RCA connectivity (cord sold separately!)

Technical details:
- 2.5mm stroke
- Operating voltage: 5-10V, exceeding 10V is not recommended
- Lightweight at only 92 grams (3.1 ounces)
- Dimensions: 30 x 91,5mm
- Grip: tapered, from 30mm to 19mm

The machine motor has a 2 year warranty and other parts have a 1 year warranty. Please note that this updated warranty applies to machines purchased in 2023 and after only.

For more information check the Xion Mini manual.

Please note! This machine is compatible with most membrane cartridges. Cartridges without membrane may cause ink leakage to the motor. Ink or other liquid inside the machine will void the warranty.

The Xion Mini Elite Set includes:
- Xion Mini machine
- Airbolt Mini Battery Pack
- Air RCA cable (packaged with machine)

Microbeau's first, compact, pen-style, PMU machine, designed to give artists full control of their work with no compromises. With its 2.5mm stroke, the Xion Mini is versatile and ready to take on all kinds of skin types right out of the box.

Descendant to the Xion S, the Xion Mini is powered by our proprietary drive mechanism to provide consistent power with virtually no vibration. With a built-in 'click' grip adjustment system that allows you to fine-tune your needle length with accuracy each time, locking your setting into place.

Powered by RCA connectivity or pair it with our Airbolt wireless solutions for ultimate portability, eGive and Siri voice control. Or pair it with the Airbolt Mini for full control during sessions, and for a more hygienic tattooing session. Experience two times the miniature power.

The Airbolt Mini is the only power supply on the current market that allows you to use your choice of cables or connectors - wirelessly! Introducing the Airbolt Mini, the smallest, most portable power supply.

Xion Mini Features:
- Compact and ergonomic design
- The machine's center off mass provides optimal balance, thus reducing hand fatigue
- Built-in 'click' grip adjustment system for needle depth
- Darklab proprietary motor with virtually no vibration
- Compatible with most standard membrane cartridges
- eGive and Siri voice control capabilities through the Darklab app via wireless solution, the Airbolt Mini
- RCA connectivity
- 2.5mm stroke
- Operating voltage: 5-10V, exceeding 10V is not recommended
- Lightweight at only 92 grams (3.1 ounces)
- Dimensions: 30 x 91,5mm
- Grip: tapered, from 30mm to 19mm

The machine motor has a 2 year warranty and other parts have a 1 year warranty. Please note that this updated warranty applies to machines purchased in 2023 and after only.

For more information check the Xion Mini manual.

Please note! The Xion Mini machine is compatible with most membrane cartridges. Cartridges without membrane may cause ink leakage to the motor. Ink or other liquid inside the machine will void the warranty.

Airbolt Mini Features:
- From 2 to up to 8 hours of battery life (charge duration is subject to variation depending on the used voltage, needle brand and size as well as environmental factors such as temperature etc.)
- Charged via USB-C (cable included)
- Connects to the machine via standard RCA
- Built-in anti-slip magnetic pad
- Easy setup
- eGive capabilities on the Darklab app via Bluetooth
- Output Voltage: 5 - 12 V
- Increment/decrement voltage interval: 0.5 V
- Maximum output current: 1.0 A
- Charger Input: USB-C
- Weight: 96 grams (3.4 oz)
- Dimensions: 55.6 mm x 48 mm x 24 mm
- Auto shutdown (State of Charge (SoC) < 3%)
- Automatic jumpstart feature
- Fast charging speed: up to 1.0 A
- 1 year warranty

For more information see the Airbolt Manual. For more information regarding the Darklab App see the Darklab App FAQ's on the manufacturer's website.

Please note that, like any Li-Ion battery, this battery will also wear down over time and capacity slowly gets lower causing working time to get shorter. This is normal wear over time and is not covered by warranty.

The Xion Mini Elite Set includes:
- Xion Mini machine
- Airbolt Mini Battery Pack
- Air RCA cable (packaged with machine)

Microbeau's first, compact, pen-style, PMU machine, designed to give artists full control of their work with no compromises. With its 2.5mm stroke, the Xion Mini is versatile and ready to take on all kinds of skin types right out of the box.

Descendant to the Xion S, the Xion Mini is powered by our proprietary drive mechanism to provide consistent power with virtually no vibration. With a built-in 'click' grip adjustment system that allows you to fine-tune your needle length with accuracy each time, locking your setting into place.

Powered by RCA connectivity or pair it with our Airbolt wireless solutions for ultimate portability, eGive and Siri voice control. Or pair it with the Airbolt Mini for full control during sessions, and for a more hygienic tattooing session. Experience two times the miniature power.

The Airbolt Mini is the only power supply on the current market that allows you to use your choice of cables or connectors - wirelessly! Introducing the Airbolt Mini, the smallest, most portable power supply.

Xion Mini Features:
- Compact and ergonomic design
- The machine's center off mass provides optimal balance, thus reducing hand fatigue
- Built-in 'click' grip adjustment system for needle depth
- Darklab proprietary motor with virtually no vibration
- Compatible with most standard membrane cartridges
- eGive and Siri voice control capabilities through the Darklab app via wireless solution, the Airbolt Mini
- RCA connectivity
- 2.5mm stroke
- Operating voltage: 5-10V, exceeding 10V is not recommended
- Lightweight at only 92 grams (3.1 ounces)
- Dimensions: 30 x 91,5mm
- Grip: tapered, from 30mm to 19mm

The machine motor has a 2 year warranty and other parts have a 1 year warranty. Please note that this updated warranty applies to machines purchased in 2023 and after only.

For more information check the Xion Mini manual.

Please note! The Xion Mini machine is compatible with most membrane cartridges. Cartridges without membrane may cause ink leakage to the motor. Ink or other liquid inside the machine will void the warranty.

Airbolt Mini Features:
- From 2 to up to 8 hours of battery life (charge duration is subject to variation depending on the used voltage, needle brand and size as well as environmental factors such as temperature etc.)
- Charged via USB-C (cable included)
- Connects to the machine via standard RCA
- Built-in anti-slip magnetic pad
- Easy setup
- eGive capabilities on the Darklab app via Bluetooth
- Output Voltage: 5 - 12 V
- Increment/decrement voltage interval: 0.5 V
- Maximum output current: 1.0 A
- Charger Input: USB-C
- Weight: 96 grams (3.4 oz)
- Dimensions: 55.6 mm x 48 mm x 24 mm
- Auto shutdown (State of Charge (SoC) < 3%)
- Automatic jumpstart feature
- Fast charging speed: up to 1.0 A
- 1 year warranty

For more information see the Airbolt Manual. For more information regarding the Darklab App see the Darklab App FAQ's on the manufacturer's website.

Please note that, like any Li-Ion battery, this battery will also wear down over time and capacity slowly gets lower causing working time to get shorter. This is normal wear over time and is not covered by warranty.

Halo 2 Crossover - Changing from Cartridge to Standard Needle setup has ever been easier!

The Halo 2 features our floating collet vise system, allowing you to use standard and/ or Screw-On tubes for cartridges and regular needles. With the grommet-less needle clip + rolling needle guide you'll need no more grommets or rubber bands. The needle self stabilizes by counter lever forces against a new ball bearing vice roller upon clicking in pace.

The new give mechanism has been designed to suit standard and cartridge needles giving you a wide range of adjustment and up to 4mm of give travel.

Technical details:
- High quality Swiss Maxon motor for optimum performance
- Slip-on StrokeWheel MotorBolt style is compatible with Halo 1 Motors
- Comes with 2.8mm, 3.4mm and 4.0mm Stroke Wheels with redesigned cams for optimum torque and even less vibration
- Tool-less disassembly for easy cleaning and maintenance
- Weight 85 grams (~ 3 oz)
- Mirror Polished body anodized for durability
- Engineered and manufactured 100% in the USA by FK Irons

The machine motor has a 2 year warranty and other parts have a 1 year warranty. Please note that this updated warranty applies to machines purchased in 2023 and after only.

For more information see the Halo 2 Manual.

Halo 2 Crossover - Changing from Cartridge to Standard Needle setup has ever been easier!

The Halo 2 features our floating collet vise system, allowing you to use standard and/ or Screw-On tubes for cartridges and regular needles. With the grommet-less needle clip + rolling needle guide you'll need no more grommets or rubber bands. The needle self stabilizes by counter lever forces against a new ball bearing vice roller upon clicking in pace.

The new give mechanism has been designed to suit standard and cartridge needles giving you a wide range of adjustment and up to 4mm of give travel.

Technical details:
- High quality Swiss Maxon motor for optimum performance
- Slip-on StrokeWheel MotorBolt style is compatible with Halo 1 Motors
- Comes with 2.8mm, 3.4mm and 4.0mm Stroke Wheels with redesigned cams for optimum torque and even less vibration
- Tool-less disassembly for easy cleaning and maintenance
- Weight 85 grams (~ 3 oz)
- Mirror Polished body anodized for durability
- Engineered and manufactured 100% in the USA by FK Irons

The machine motor has a 2 year warranty and other parts have a 1 year warranty. Please note that this updated warranty applies to machines purchased in 2023 and after only.

For more information see the Halo 2 Manual.

Please note! This is the Halo 2 machine body only, no motor is included.

The Halo2 body features our floating collet vise system, allowing you to use standard and/ or Screw-On tubes for cartridges and regular needles. With the grommet-less needle clip + rolling needle guide you'll need no more grommets or rubber bands. The needle self stabilizes by counter lever forces against a new ball bearing vice roller upon clicking in pace.

The new give mechanism has been designed to suit standard and cartridge needles giving you a wide range of adjustment and up to 4mm of give travel.

Technical details:
- Slip-on StrokeWheel MotorBolt style is compatible with Halo 1 Motors
- Tool-less disassembly for easy cleaning and maintenance
- Mirror Polished body anodized for durability
- Engineered and manufactured 100% in the USA by FK Irons

The machine body has a 1 year warranty.

For more information see the Halo 2 Manual.

This interchangeable BotorBolt will power all Stroke Wheel driven MachineBodies including the Halo 1 and Halo 2 Machines.

This motor is compatible with both Halo1 and Halo2 with the appropriate cams installed. Cams linked below.

Halo 1 motors and stroke wheels may be used on the Halo 2 body, however, the revised Halo 2 stroke wheels are not compatible with the Halo 1 MachineBody.

The motor housing can be sanitized with your preferred disinfectant. REMEMBER MOTORBOLT IS NOT AUTOCLAVABLE as moist and fluids will ruin the motor and void its warranty.

Cams not included

1 year warranty

Hex Motor is compatible with Edge, Edge X and Direct2 machines.

The motor housing can be sanitized with your preferred disinfectant. REMEMBER MOTORBOLT IS NOT AUTOCLAVABLE as moist and fluids will ruin the motor and void its warranty.

1 year warranty