The High-Jack Switch has all the great features of the basic High-Jack with the great new feature of having a switch box at the end to be able to toggle back and forth between two cords. This is a great feature for people using multiple cord types or just want two cords connected so they don't have to switch cords back and forth. The toggle move from side to side selecting which cord is powered with off in the middle, so you can run on constant and turn your machine off at the High-Jack.

- With the Switch version you can connect 2 cords at the same time
- Lifts the cord up easing hand fatigue
- Keeps the cord out of the way and off the floor or your lap
- Attaches magnetically onto the side of your workstation
- Magnetic attachment plates that can be screwed on any surface are also included if a magnetic surface is not readily available to you
- Total length of about 125cm (this is the legnth of the High-Jack the height you get for your cord depends on the placement of the high jack on the side of the workstation)
- Weight: 1kg

A few words from Joshua about The High-Jack:
"The High-Jack is a product I developed to make my clipcord drape and move more easily. The High-Jack magnetically attaches to your work station and plugs in to the Machine port on your power supply. Your clip cord then plugs in to the High-Jack, effectively lifting the clipcord jack 5 feet (about 150cm) in to the air. This allows the cord to drape naturally from above you, doesn't rub on the floor, doesn't snag across your lap and it takes weight off of the back of the machine easing hand fatigue greatly.

I have been using this product for over a year now, along with the rest of my shop. We were originally just testing them out but I speak for me and the rest of the shop when I say that we can't imagine tattooing without them now."

Wall mounting supplies for a set of 40 Hex Hive pieces.

Set includes:
2x Mounting screws (#10 x 4-1/2")
2x Wall anchor for screw
1x Torx drill bit compatible with screws

Mounting instructions can be seen on the video below. Please note that additional tools are needed for installation

Wall mounting supplies for a set of 100 Hex Hive pieces.

Set includes:
4x Mounting screws (#10 x 4-1/2")
4x Wall anchor for screw
1x Torx drill bit compatible with screws

Mounting instructions can be seen on the video below. Please note that additional tools are needed for installation

Tank Storm Magnetic attachment set, 3pcs

Magnetic attachments include:
- Additional side tray (21 x 12cm), max load capacity 800 grams
- Bottle holder for 2 bottles (bottle diameter 7,5cm), max load capacity 870 grams
- Tissue roll holder, adjustable (max roll width 31cm), max load/pull force capacity 640 grams

Material: Stainless steel
Color: Black

These side attachments are attached with a magnet so they may be compatible with other workstations as well.

Flat disc magnet has a very strong self-adhesive side made of cushioning foam and an impressive adhesive force of approx. 2,9kg.

With this disc magnet, any surface can quickly turn into a notice board and even heavy objects can be hung anywhere without causing any holes. Great for attaching supplies or holders to the side of a metal workstation for example or fixing them firmly to the top!

Features:
- Strong 3M adhesive on one side to attach firmly anywhere
- 25 mm diameter
- 2 mm thickness
- Adhesive force: approx. 2,9kg (approx. 28,4 N)
- Direction of magnetisation: axial (parallel to height)
- Adhesive: 3M, No. 4920, 0,40 mm
- Weight: 7,5 grams
- Coating: Nickel-plated (Ni-Cu-Ni)

Please note: The magnets need to be placed, pressed and dried on suitable surfaces to adhere properly. Please ensure magnet adhesive has properly attached to the surface and dried before use.

BUY MORE AND SAVE MONEY! Get a discount when you buy a full package of 10pcs.