Dan Kubin - DMC V2 - Gold

The DMC V2 has an improved cam geometry which retracts faster to eliminate snagging. It has a springiness to the hit accompanied by an impact.  This makes for a very efficient punch without being traumatic.

The "sharp" side of the hit drives down faster, while being gentler than the original.
The "soft" side is more mellow, and has a gentle hit that can still saturate with ease while giving smooth fades.

There are also great improvements to the sound of the machine. It is about half the noise as the prior.

The DMC is a punchy all purpose driver for both standard and cartridge needles. Effortlessly line off the tip of the needle, and shade and pack with finesse and ease. No tuning. No lubrication.  

Flipping polarity of the clipcord significantly changes the hit of the machine from sharp to slightly dull. The sharper setting mainly for larger lines and precision shading, and the duller setting for fine line and lower volts operations.

There is an adjustment screw for disengaging a return spring for use with cartridges. Back it out all the way when using cartridges, and turn it in all the way when using standard needles.

Technical Details:
- 24k gold plated frame with black nickel hardware
- The DMC V2 is the latest version of the DMC machine
- Less noise compared to the original
- All purpose machine, for lining, shading and packing
- For use with both traditional needles and cartriges
- Runs in the 3.8-6.5 volt range (This will increase over time as the motor breaks in)
- Machine weight
- The thumbscrew on the DMC is ambidextrous, this means it can be on either side of the frame to suit the artist's preferences
- Patent pending